How To: Update firmware on PULSAR/ATOM/NEUTRON Rig

[John Che]

What you will need:

- The Rig

- Power source for Rig

- MicroSD Card

- Current firmware from Technica 3D's firmware page: http://www.technica3d.com/support/firmware.php


Process:

- Format the microSD card (FAT32 only!)

- Copy the firmware onto the microSD card, DO NOT COPY INTO A FOLDER. Firmware must be in root directory.

- Power off the rig

- Insert the microSD card into the slot located on the back MOTOR BOX

- Power on the rig

- The LED on the MOTOR BOX will rapidly flash green for about 10 seconds; when the flashing stops, the update is complete

- Power off and remove card