View Announcements

Atom™ from 3ality Technica



Atom™ by 3ality Technica is a new breed of light weight, camera specific 3D camera platform designed from the ground up for the world’s most innovative game changing camera; Epic from RED Digital Cinema.

Atom has been optimized to take full advantage of the small form factor of the Epic while still accommodating full-sized PL and PV primes as well as smaller zooms like the Optimo 16-42 or 30-80. The result is a full 5K-3D beamsplitter system weighing as little as some 35mm camera systems.

>> Read more about the release of the Atom from the REDUser forum...

>> Read more about the Pedro's feedback of the Atom on the Steadicamforum.com site...


Atom Renders and Gallery
Atom rig mounted onto a Scorpio Head
Atom rig mounted onto an Alpha Head
Atom rig mounted onto Pedro Giumaraes' Steadicam
Atom Spec Sheet

General Specifications

    Features:
  • IO Travel: (Beamsplitter Mode) 0 – 3.5” / 0 – 90mm
  • IO Travel: (Side X Side) 3.75” – 7.5” / 95mm – 190mm (Spacer required for increased IO distance)
  • Convergence: 4’ @ 3.5” (1.2m @ 90mm)
  • Beamsplitter FOV: 65° (with an 85mm lens front)
  • Beamsplitter box lens entrance pupil: 4.72” / 120mm
  • Height (Studio Mode): 20.5” / 520mm
  • Height (Handheld Mode): 17.5” / 445mm
  • Length (Beamsplitter Mode): 19” / 480mm
  • Length ( Side x Side Mode): TBA
  • Width (Main, Under/Thru): 8.5” / 216mm
  • Width (Main, Over/Thru): 11” / 280mm
  • Width (Beamsplitter Box): 17” / 430mm

Atom Configurations
    Atom
  • Lightweight beamsplitter or side by side system (Aluminum)
  • Integrated IO+C electronics and motors
  • Optional integrated FIZ electronics
  • Bare rig weight in hand held config: 18lbs
  • Bare rig weight in studio config: 23lbs
  • Ready to shoot system weight as low as 40lbs possible

    Atom Pro
  • Lightweight beamsplitter or side by side system (Aluminum)
  • Integrated IO+C electronics and motors
  • Integrated muxing, sync and power conditioning electronics (eliminates 3 external components from rig)
  • Epic specific 3D IO modules (eliminates up to 4 cables per camera / 8 total)
  • Optional integrated FIZ electronics (eliminate up to 2 external lens control boxes)
  • Bare rig weight in hand held config: 19lbs
  • Bare rig weight in studio config: 24lbs
  • Ready to shoot system weight under 40 lbs possible

    Atom Mag
  • Lightweight beamsplitter or side by side system (Magnesium)
  • Integrated IO+C electronics and motors
  • Optional integrated FIZ electronics
  • Bare rig weight in hand held config: 13lbs
  • Bare rig weight in studio config: 18lbs
  • Ready to shoot system weight as low as 36 lbs possible

    Atom ProMag
  • Lightweight beamsplitter or side by side system (magnesium)
  • Integrated IO+C electronics and motors
  • Integrated muxing, sync and power conditioning electronics (eliminates 3 external components from rig)
  • Epic specific 3D IO modules (eliminates up to 4 cables per camera)
  • Optional integrated FIZ electronics
  • Bare rig weight in hand held config: 14lbs
  • Bare rig weight in studio config: 19lbs
  • Ready to shoot system weight under 37 lbs possible

Pricing
    Atom will be offered in two versions; aluminum and magnesium. Either system is compatible with our pro kit as well as our integrated lens control system.

  • Atom Aluminum: $64,000
  • Atom Magnesium: $84,000
  • Pro Kit for either: $20,000
    (machined from magnesium, compatible with Atom AL or Atom Mg)

    Includes;
  • Pair of Epic specific 3D-IO Modules which route all relevant Epic signals to a single multi pin/format connector.
  • Atom “shark fin” structural component with muxing, sync and power conditioning electronics and connectivity.

Lens control: $12,500 (integrated modular electronics and remote hand unit)
Hedén Lens drives: $16,000 (large $2650, small $2750, Set of 6)